Serving areas of Ohio, West Virginia, Kentucky, and Virginia - See Details

METALCLAD CeramAlloy CP+
Nuclear D.B.A. Tested ASTM 3911-89

Repairs deep erosion/corrosion damage.
Cold Curing, Safe to Use and Easily Applied.

Cures to a Metal Hard, Ceramic-Like Finish.

NUCLEAR D.B.A. Tested ASTM 3911-89

METALCLAD CeramAlloy CP+ is a two component, 100% solids, high-performance polymer composite specifically formulated to provide effective repair and rebuilding characteristics on all types of fluid flow equipment.

METALCLAD CeramAlloy CP+ is a paste when mixed, so it is easily applied. When cured, however, CP+ becomes a metal-hard, ceramic-like compound.

METALCLAD CeramAlloy CP+ is the best material to use when making repairs to areas deeply damaged by erosion/corrosion environments on all types of fluid flow components.

  • Trowelable
  • Requires No Heat
  • Unlimited Shelf Life
  • 100% Solids
  • Safe & Simple To Use
ABS Type Approved Product
Korean Register Approved Product

Technical Data

Volume capacity per kg.
30 in3 / 492 cc
Mixed density
0.073 lbs per in3 / 2.03 gm per cc
Coverage rate per kg. @ 0.25 in / 6mm
120 in2 / 0.077 m2
Shelf life
Indefinite
Volume Solids
100%
Mixing ratio Base Activator
By Volume 2 1
By Weight 3.5 1

Working Life and Cure Times

Ambient Temperature Working Life Machining Light Load Full Mechanical Chemical Immersion
41°F 5°C 4 hrs. 1 day 4 days 8 days
59°F 15°C 2 hrs 12 hrs. 2 days 5 days
77°F 25°C 1 hr 6 hrs. 1 day 3 days
86°F 30°C 40 min. 4 hrs. 20 hrs. 2 days

Physical Properties

Typical Values Test Method
Compressive strength 14,000 psi 980 kg/cm2 ASTM D-695
Flexural strength 15,500 psi 1085 kg/cm2 ASTM D-790
Hardness - Shore D 82 ASTM D-2240
Tensile Shear Adhesion    
Steel 2900 psi 203 kg/cm2 ASTM D-1002
Aluminum 2750 psi 193 kg/cm2 ASTM D-1002
Copper 2400 psi 168 kg/cm2 ASTM D-1002
Stainless Steel 3300 psi 231 kg/cm2 ASTM D-1002
Surface resistivity 1 x 1015 ohms ASTM D-257
Volume resistivity 1 x 1015 ohm/cm ASTM D-257
Dielectric constant 7.5 ASTM D-150
Dielectric strength 500 volts/mil ASTM D-115
Breakdown Voltage 18.6 Kv ASTM D-115

Chemical Resistance

Acetic acid (0-10%) EX Methyl alcohol G
Acetic acid (10-20%) G Methyl ethyl ketone G
Acetone G Nitric acid (0-10%) EX
Aviation fuel EX Nitric acid (10-20%) G
Butyl alcohol EX Phosphoric acid (0-5%) EX
Calcium chloride EX Phosphoric acid (5-10%) G
Crude oil EX Potassium chloride EX
Diesel fuel EX Propyl alcohol EX
Ethyl alcohol G Sodium chloride EX
Gasoline EX Sodium hydroxide EX
Heptane EX Sulfuric acid (0-10%) EX
Hydrochloric acid (0-10%) EX Sulfuric acid (10-20%) G
Hydrochloric acid (10-20%) G Toluene G
Kerosene EX Xylene EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Extended Information

Ask an ENECON Tech

Sign up for ENECON's latest Repair - Don't Replace solution

Fill out my online form.