Serving areas of Ohio, West Virginia, Kentucky, and Virginia - See Details

ENESEAL WBC

Breathable, High Performance Polymer Composite Floor Protection System

ENECLAD® WBC is a water based, two component coating system that has been specifically designed to seal and protect concrete surfaces that may experience moisture problems. ENECLAD® WBC is a breathable coating system that resists blistering due to hydrostatic pressure issues through the concrete. It bonds to virtually any mineral/cement substrate as well as wood.

ENECLAD WBC exhibits excellent adhesion to any type of concrete substrate. It also has great impact and abrasion resistance.

  • No Odor
  • Excellent Abrasion & Impact Resistance
  • Outstanding Adhesion
  • Safe and Simple to Use

Technical Data

Theoretical coverage rate per kg.
@ 10-12 mils
25-30 ft2 / 2-2.5 m2
Mixing ratio Base Activator
By Volume 2
By Weight 2
Ambient Temperature Working Life Minimum Overcoating Maximum Overcoating
41°F  5°C  120 min.  16 hrs. 48 hrs.
59°F 15°C 75 min. 12 hrs. 36 hrs.
77°F 25°C 60 min. 8 hrs. 24 hrs.
86°F 30°C 50 min. 5 hrs. 16 hrs.

Colors

Haze Gray

Note: Other colors are available on a “special order” basis. However, there are minimum / multiple quantity requirements for such orders and there may be an increase in cost. Additionally, due to formulation restrictions, not all colors are possible for all materials. Speak to your local ENECON Sales Representative for more information.

Due to monitor / printer differences, actual colors may vary slightly from the representations appearing in this chart.

Working Life and Cure Times

Ambient Temperature Foot Traffic Fork Lift Full Cure
41°F  5°C  48 hrs.  7 days  14 days
59°F 15°C 36 hrs. 6 days  10 days 
77°F 25°C 24 hrs. 4 days  7 days
86°F 30°C 18 hrs. 3 days  5 days

CHEMCLAD P4C Technical Data

Theoretical coverage rate per kg. @ 3 mils
70 - 80 ft2 / 6 - 7 m2
Mixing ratio Base Activator
By Volume 2 5
By Weight 2 5
Ambient Temperature Working Life Minimum Overcoating Maximum Overcoating
41°F 5°C 120 min. 16 hrs. 48 hrs.
59°F 15°C 75 min. 12 hrs. 36 hrs.
77°F 25°C 60 min. 8 hrs. 24 hrs.
86°F 30°C 50 min. 5 hrs. 16 hrs.

Chemical Resistance

 Gasoline EX  Detergent Solution EX 
 Kerosene EX Trisodium Phosphate  EX
50% Anti-Freeze  EX 20% Calcium Chloride  EX
Transmission Fluid  EX 10% Hydrochloric Acid EX 
Power Steering Fluid  EX 10% Sulfuric Acid EX 
Motor Oil  EX 10% Sodium Hydroxide  EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Extended Information

Ask an ENECON Tech

Fill out my online form.

Sign up for ENECON's latest Repair - Don't Replace solution

Fill out my online form.