Serving areas of Ohio, West Virginia, Kentucky, and Virginia - See Details

ENECRETE® WS

Water-Based Penetrant / Weather Barrier for Masonry, Concrete, Brick & Stone

UV resistant, breathable penetrant provides unrivaled water repellent properties to most mineral substrates. Environmentally safe. Invisible when dry.

ENESEAL MP is a single component, water-based, ultra-low viscosity weather barrier which dries to a completely invisible, water repellent masonry sealer. It provides extraordinary weather protection to virtually all types of concrete, masonry and mineral surfaces.

ENESEAL MP forms a hydrophobic barrier inside masonry pores that repels water and water-borne salts. This significantly reduces the damaging effects of moisture penetration into concrete and masonry, such as surface scaling, freeze-thaw cracking and corrosion of reinforcing steel.

The invisible barrier forms below masonry surfaces to depths of up to 3/4 inch and, therefore, will not wear away as a result of surface traffic and/or harsh weather conditions. This barrier is also breathable – allowing water vapor to escape from inside the concrete or masonry while dramatically reducing liquid water penetration into the substrate.

  • UV Resistant
  • Water-Based
  • Breathable
  • Invisible

Technical Data

Unit Size:
20 kg
Color:
White liquid
Odor:
None
Applied Appearance:
Invisible
Vehicle Type:
Water based siloxane / silane
Shelf Life:
2 years
Coverage Rate:
Approx. 60 sq. ft. (5.6 sq. m.) / kg depending on porosity, texture, etc.
Rain Resistance:
4 hours minimum (77°F / 25°C @ 50% relative humidity)
Full Weather Resistance
7 days (77°F / 25°C @ 50% relative humidity)

Physical Properties

Water Absorption (ASTM C-642)
Concrete brick - 1.6%
Red clay brick - 0.3%
Depth of Penetration (OHD L-34)
Concrete brick - 1/4 inch to 1/2 inch
Red clay brick - 1/3 inch to 3/4 inch
Scaling Resistance (ASTM C-672)
ENESEAL® MP coated concrete - rating "0 - no scaling" at 50 cycles
Uncoated concrete - rating "5 - severe scaling" at 25 cycles
Moisture Vapor Transmission
100%
VOC (ASTM D-2369)
5 gms / ltr
Freeze Thaw Resistance of Liquid Product
50 cycles (0° F) - No effect
Surface Appearance After Application
Unchanged
UV Resistance
Excellent

Extended Information

Ask an ENECON Tech

Fill out my online form.

Sign up for ENECON's latest Repair - Don't Replace solution

Fill out my online form.